Sunflower Seed Huller / Sunflower seed hulling machine

TFKH1500 type sunflower shelling and sorting unit is widely used in sunflower seed production. Since its appearance in 2009, it has been highly praised by sunflower processing enterprises and exported to many countries and regions such as Europe and the United States. It has passed the EU CE certification. It is an ideal choice for sunflower seed processing at home and abroad. Main features: 1. The design of multiple shellers and wide screen surface improves the efficiency of shelling and separation. 2. Through the frequency conversion technology, the speed of the sheller is controlled, so that the raw materials of different humidity and varieties can be processed reasonably. 3. The sunflower seeds that are not separated once enter the next shelling cycle through the wind return device, which improves the degree of automation. Equipment composition Feeding hopper, straight-line impurity remover, bucket elevator, four off main engine, check machine (3 sets), suction return device, receiving hopper, electric control cabinet (see the figure below for details) main parameter Power: 13.10kw (three-phase 380V) Processing capacity of raw materials: 0.8-1.0t/h (the data is collected from the Northeast xiaosantaomei raw materials when the humidity is 12% and the particle size is on the 3.2mm square hole screen. If the oil sunflower is processed, the small seeds less than 3.0mm shall be removed generally. The yield varies from 500-800 kg. The variety, humidity and grain size of raw materials all affect the actual yield.) Whole kernel rate: more than 90% (less than 1 / 2 of whole kernel is broken kernel) Net removal rate: over 95-98% Kernel loss: about 0.3% Equipment size (length, width and height) 12.9m × 2.8m × 3.9m Weight: 5.5t